Common sense of stainless steel elbow 2018-11-01 1. After the production of stainless steel elbow, the elbow needs to be sealed, and the elbow needs to be handled with care. 2. After passivation, the surface of the stainless steel elbow needs to be tied up with three-proof canvas to increase the protection. 3. Temporary fittings and supporting objects of stainless steel elbows are made of stainless steel. If you use a weight or bending tool, you need to install a protective plate at the position where they may be in contact with the stainless steel for protection. These protective plates must be made of stainless steel or lead plates. 4. When transporting stainless steel materials, they need to be placed in a closed box. The open box must be covered with canvas, and there must be plastic plugs at both ends of the pipe for blocking. 5. When placing the material of the stainless steel elbow, it should not be affected by some impurities such as carbon steel. When storing it, try to place it in a relatively dry room to avoid moisture, salt water, dust, iron and Where other contaminants meet.