Professional Stainless Steel Pipe Manufacturer: The pursuit of quality, Excellence, Best meet customer needs.

Exhaust Flanges

by:HHGG     2020-09-09

A version of the wing-nut clamp with a washer is also obtainable. The clamp offers sufficient sealing pressure to totally compress the O-Ring, in order that the flanges and the centering ring are steel to steel. The heavy-duty spring helps the complete vary of manufacturing tolerance variables. A pin can be inserted to prevent accidental launch of the toggle lever.


Once you specify the right schedule of the flange that matches the schedule of the pipe, if you look from the inside, it is going to be nearly flush. This is a weld neck flange, this can be a very popular flange, lots of people use it. 150 pound flange, it has 4 bolts, again, raised face, it has somewhat lip on the backside, the stamping on the aspect.


2 inch flange, this can be a 2 inch pipe sample, and also you see the slip on flange is the easiest one, you just slide it on and then you definitely weld it. This is a raised face flange, and the raised face flange, on the bottom of the flange, right here, you'll be able to see that has a lip, a 1/sixteen inch lip. This is also a slip on flange, but this is a flat face, and we're displaying you for instance that this doesn't have a raised face, this is a flat faced flange slip on flange.


New cross nation bindings remove the flange totally and use a steel bar embedded throughout the sole as a substitute. The gasket sort and bolt sort are generally specified by the standard; nonetheless, sometimes the standards check with the ASME Boiler and Pressure Vessel Code (B&PVC) for particulars (see ASME Code Section VIII Division 1 – Appendix 2). These flanges are acknowledged by ASME Pipe Codes such as ASME B31.1 Power Piping, and ASME B31.3 Process Piping. The wing-nut clampis hand tightened until metallic contact is felt.


This material is equipped in a normalized condition and then Charpy V-Notch examined at -50F. On the weldneck also, you need to specify the bore, so should you specify the schedule, whether it’s for schedule forty, schedule 80 and so on, that can determine the dimensions of the bore right here. Again, that is also, that after you weld it, you don’t want your pipe to be thicker than the flange; that won't be good for the move.


The toggle clamps are ideal for situations where the clamp must be eliminated regularly, like leak testing or gauge calibration. They are used to attach an ISO-KF flange on to a chamber or base plate. A centering ring assembly is required between the flange and the opening. The bulkhead clamp kit consists of the two-piece clamp, bolts and washers. 350 LF2 is a carbon steel fitting materials, similar to A105, that's used normally industrial functions and can withstand steady service right down to -46F.


Today we’ll speak about completely different flanges such weld neck flange, slip on flange and blind flange and so on. This is a slip on flange and it is a 2 inch flange, 150 pound. All flanges that we're exhibiting you today for the purpose of this video are one hundred fifty pound flanges.


The method the weld neck flange is used is you take a pipe, again, this can be a 2 inch pipe, and you have to have a bevel. This doesn't have a bevel, but in case you are installing, you’ll have a bevel, and then you just butt it up proper like this and you then make a weld. That’s how it's installed and it’s called a weldneck flange, this can be a welding neck of the flange.


We are a performance driven culture that uses stainless steel pipe to ensure continuous improvement.
With comprehensive knowledge on stainless steel pipe,why not visit the highly recommended site Honghai Stainless Steel Pipe to get a full appreciation of the best ?
Undoubtedly, stainless steel pipe are made with advanced equipment.
The group's Quality Systems Manager (QSM) is responsible for ensuring that Zhejiang Honghai Steel Pipe Manufacturing Co., Ltd. has in place systems that guarantee quality throughout the Group.
When it comes to stainless steel pipe stainless steel tube, Zhejiang Honghai Steel Pipe Manufacturing Co., Ltd. is the name to reckon with. Not only are they best, they are the most experienced as well and provide wide range of services as well as products at affordable prices. Find out more information on Honghai Stainless Steel Pipe.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: